Volume 71, Issue 1, January 2023
Published:
2023-01-01
Discussion-Opinion-Editorial
-
Why, from now on, Tesla, Apple, and the Elk will have interests in securing minerals at the beginning of the supply chain
Jayanta Bhattacharya (Author)3-6
Abstract views: 5 times|
Download: 2 times|
https://doi.org/10.18311/jmmf/2023/33346
Industry Directions
-
Looking ahead in 2023: Collaboration, Partnership and Innovation in the Limestone Industry
Jayanta Bhattacharya (Author)7-10 Abstract views: 10 times|
Download: 1 times|
https://doi.org/10.18311/jmmf/2023/33348
Articles
-
Electric Vehicle for the Movement of Disabled People
Kusumika Krori Dutta, Premila Manohar, Chaluvaraj N., Pranathi E., Ranjitha S., Isha Gupta (Author)11-18Keywords:
Mono Car, Movement disable, Electric Vehicle, BLDC motor Abstract views: 11 times|
Download: 8 times|
https://doi.org/10.18311/jmmf/2023/33349
-
NACA Wing RIB Design and Optimization
Vasanth G., Sunil Sunagad, Darshan S. Mekali, Siddlingesh A. U., Veeranna B. Nasi (Author)19-23Keywords:
Design and optimization, different cut-out configurations, Experimentation cost, Changing dimensions, Wing Rib Abstract views: 10 times|
Download: 6 times|
https://doi.org/10.18311/jmmf/2023/33350
-
Effect of Substrate Temperature on Properties of Copper Oxide Thin Films Coated by Spray Pyrolysis
Ben Jos, K. J. Saji, E. I. Anila (Author)24-28Keywords:
Spray pyrolysis, surface morphology, bandgap energy, Urbach tailing Abstract views: 5 times|
Download: 2 times|
https://doi.org/10.18311/jmmf/2023/33351
-
Multi-Response Optimisation of End Milling Process Parameters
B. Srinivasa Rao, Ch. Kanna Babu, H. Shivananda Nayaka (Author)29-39Keywords:
GRA, ANOVA, MRR, End milling, Surface roughness, Tool tip temperature Abstract views: 13 times|
Download: 14 times|
https://doi.org/10.18311/jmmf/2023/33352
-
Dynamic Modelling and Modal Analysis of an Offshore Wind Turbine
S. L. N. Vishal, Chandrasekhara C. V. (Author)40-44Keywords:
Floating offshore wind turbine, Modal analysis, Natural frequency, Mode shapes, Ashes Abstract views: 10 times|
Download: 3 times|
https://doi.org/10.18311/jmmf/2023/33353
-
Studies on Effect of Loading Rate of Hybrid Glass/Carbon Composites Subjected to Open Hole Tensile Test
Deepak R., Sunith Babu L., Pradeep Kumar K. V., Sumanth R., Prateek M. U. (Author)45-50Keywords:
Open Hole Tensile Test, Peak Force, Loading Rate, Polymer Composites, Ultimate Tensile Strength Abstract views: 5 times|
Download: 5 times|
https://doi.org/10.18311/jmmf/2023/33355
-
Effect of the Cooling Condition and Corresponding Microstructure on Tensile and Impact Behaviour of Low Carbon Steel (EN8)
P. Rajendra, K. R. Phaneesh, C. M. Ramesha, Madev Nagaral, V. Auradi (Author)51-56Keywords:
Heat Treatment, Critical cooling Temperature, cooling medium, and Microstructure Examination Abstract views: 4 times|
Download: 2 times|
https://doi.org/10.18311/jmmf/2023/33356
-
Effect of ECAP on Microstructure and Wear Resistance of AZ91 Magnesium Alloy
Rajesh Yandigeri, Paresh S. V., C. Siddaraju, Niranjan C. A. (Author)57-66Keywords:
Microstructure, Wear Resistance, Machinability, Microhardness, Homogenized, ECAP Abstract views: 6 times|
Download: 2 times|
https://doi.org/10.18311/jmmf/2023/33357
-
In-Vitro Biocompatibility Study and Comparison of Magnesium AZ31 and PEEK 450G Biomaterials used as Cardiovascular Stent Implants
Vasantha Kumar, C. M. Ramesha, V. Sharanraj, Sadashiva M., Kavya K. (Author)67-72Keywords:
Cytotoxicity; Biomaterials; PEEK 450G; In-Vitro; Biocompatibility; Cardiovascular stent implant Abstract views: 2 times|
Download: 2 times|
https://doi.org/10.18311/jmmf/2023/33358
-
Study of Effect of Hot Forging on Microstructure and Mechanical Properties of Al-SiC+3 Wt.% AL2O3 Hybrid Composites
Madhusudan B. M., Abhishek P., Amith K., Shantharaju S. (Author)73-78Keywords:
Rockwell hardness test , compression test, SEM, Composites, Al2O3, SiC, EDAX, MMC Abstract views: 5 times|
Download: 2 times|
https://doi.org/10.18311/jmmf/2023/33359
-
Bicycle Equipped with Slotted Lever Quick Return Mechanism
Paresh S. V., Rajesh Yandigeri (Author)79-87Keywords:
Knee Flexion, Musculoskeletal, PFJ, Sciatic Nerve, SLQRM Abstract views: 5 times|
Download: 2 times|
https://doi.org/10.18311/jmmf/2023/33360
-
Mechanical and Wear Behaviour Analysis of Graphene Reinforced Aluminum Alloy 7010 Metal Matrix Composite
M. D. Umar, R. Muraliraja, P. Rathnakumar, T. R. Tamilarasan (Author)88-93Keywords:
Metal matrix composite, SEM, EDS, Wear rate Abstract views: 4 times|
Download: 1 times|
https://doi.org/10.18311/jmmf/2023/33361
-
Study on Dimensional Inconsistency of Titanium Alloy (Grade 5) During Machining
Nishanth R. A., Mohandas K. N., C. M. Ramesha (Author)94-98 Abstract views: 3 times|
Download: 1 times|
https://doi.org/10.18311/jmmf/2023/33363
-
Design, Analysis and Fabrication of Hydroelectric Turbine for Open Canal’s of the River
Naveen Kumar B. K., Sushma M. S., Neeruganti Jagadeesh, Kulkarni Phaniraj, Halli Anand, Pranav P. S., Praveen Kumar M. R. (Author)99-105Keywords:
Water turbine, Water resources, CFD analysis, Energy crisis, Nonrenewable resources Abstract views: 3 times|
Download: 1 times|
https://doi.org/10.18311/jmmf/2023/33365
-
Optimization of Operational Parameters in Friction Stir Welding of AA6061-TiO2 Composite using Topsis Approach
Subramanya R. Prabhu B. (Author)106-112Keywords:
AA6061-TiO2, Friction stir welding, TOPSIS, Optimization Abstract views: 7 times|
Download: 5 times|
https://doi.org/10.18311/jmmf/2023/33366
-
A Numerical Study of Two-Phase Flow Through an Asymmetric Channel with Velocity Slip and Joule Heating Effects
S. H C. V. Subba Bhatta, S. Ram Prasad, Y. S. Kalyan Chakravarthy (Author)113-120Keywords:
Particulate suspension, convergent channel, velocity slip, Joule heating Abstract views: 2 times|
Download: 2 times|
https://doi.org/10.18311/jmmf/2023/33367
