A Numerical Study of Two-Phase Flow Through an Asymmetric Channel with Velocity Slip and Joule Heating Effects
Authors
-
Department of Mathematics, M. S. Ramaiah Institute of Technology, Bangalore 54 ,IN
S. H C. V. Subba Bhatta -
Department of Mathematics, M. S. Ramaiah Institute of Technology, Bangalore - 54 ,INS. Ram Prasad
-
Department of Mathematics, M. S. Ramaiah Institute of Technology, Bangalore - 54 ,INY. S. Kalyan Chakravarthy
DOI:
https://doi.org/10.18311/jmmf/2023/33367Keywords:
Particulate suspension, convergent channel, velocity slip, Joule heatingAbstract
The goal of the current investigation is to examine the impact of velocity slip and Joule heating effects on a particulate flow through an asymmetric channel (convergent channel). The transformed governing equations are solved by employing the shooting method. The impact of influential parameters on fluid as well as particle phases of velocity and temperature fields has been analyzed graphically. The present results exactly match previously published results in some limited cases. In this study, it is perceived that an augmentation in velocity slip leads to an increment in fluid velocity in the left half and a diminution in the right half of the channel.
Downloads
Metrics
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
References
Terril R.M, (1965): “Slow Laminar Flow in a Converging or Diverging Channel with Suction at One Wall and Blowing at the Other Wall”, ZAMP, 16,306.
Yilmaz, Adil Akyatan and Erol Senocak (1998): “Slow flow of a Reiner-Rivlin fluid in a converging or diverging channel with suction and injection”, Turkish Journal of Engineering and Environmental Sciences, 27, 179-183.
Esmaeilpour, Naeem Roshan, Negar Roshan and Ganji D D, (2011): “Analytical method in solving flow of viscoelastic fluid in a porous converging channel”, International Journal of Mathematics and Mathematical Sciences, 257903.
Muhammed Hafeez, Hashim and Masood khan, (2020): “Jeffrey-Hamel flow of hybrid nanofluids in convergent and divergent channels with heat transfer characteristics”, Applied Nanoscience, 12, 5459-5468.
Mallikarjuna.B, Ramprasad. S, Shezahad S and Ayyaz. R, (2022): “Numerical and regression analysis of Cu nanoparticles flows in distinct base fluids through a symmetric non-uniform channel”, The EuropeanPhysical Journal Special Topics, 231,557-569.
Uddhab Biswal, Chakraverty. S, Ojha B K, Ahmed Kadhim Hussein, (2022): “Numerical investigation on nanofluid between two inclined stretchable walls optimal Homotopy analysis method”, Journal of Computer Science, 63, 101759.
Ramprasad S, Subba Bhatta S.H.C.V, Mallikarjuna B and Srinivasacharya D, (2017): “Two-phase particulate suspension flow in convergent and divergent channels: A Numerical Model”, International Journal of Applied and Computational Mathematics, 3, 843-858.
Sadia Siddiqaa, Naheed Begum, Anwar Hossanic, Shoabia. M and Rama Subba Reddy. G, (2018): “Radiative heat transfer analysis of non-Newtonian dusty Casson fluid along a complex wavy surface”, Nuerical Heat Transfer, Part A, 73, 209-221.
Hady. F.M, Mahdy.A, Mohammed S.E, Omoma and Abo Zaid, (2019): “Unsteady natural convection flow of a dusty non-Newtonian Casson fluid along a vertical wavy plate: Numerical approach”, Journal of Brazilian Society of Mechanical Sciences and Engineering, 41, 472.
Turkyimazoglu. M, (2020): “Suspension of dust particles over a stretchable rotating disk and twophase heat transfer”, International Journal of Multiphase Flow, 127, 103260.
Hosam A. Nabwey and Mahdy, (2021): “Numerical approach of micropolar dust-paricles natural convection fluid flow due to a permeable cone with nonlinear temperature”, Alexandria Engineering Journal, 60, 1739-1749.
Mallikarjuna.B, SubbaBhatta. S.H.C.V and Ramprasad. S, "Velocity and thermal effects on MHD convective radiative two-phase flows in an asymmetric nonuniform channel", Propulsion and Power Research, (2021), 10, 169-179.
Rajesh Kumar Chandrawat, Varun Joshi and Beg O.A, (2022): “Numerical study of time dependent flow of immiscible Saffman dusty (fluid-particle suspension) and Eringen micropolar fluids in a duct with a modified cubic B-spline Differential Quadrature method”, International Communications in Heat and Mass Transfer, 130, 105758.
Ramprasad S, Subba Bhatta S.H.C.V and Mallikarjuna B, (2018): “Slip effects on MHD convective Two - phase flow in a divergent channel”, Defect and Defusion Forum, 388, 303-316.
Mallikarjuna B, Subba Bhatta S.H.C.V and Ramprasad S, (2021): “Velocity and thermal slip effects on MHD convective radiative two-phase flows in an asymmetric non-uniform channel”, Propulsion and Power Research, 10, 169-179.
Srinivasacharya.D and Jagadeeshwar, (2019): “Effect of joule heating on the flow over an exponentially stretching sheet with convective boundary condition”, Mathematical sciences, 13, 201-211.
Ali J. Chamkha, Dogonchi A.S and Ganji DD, (2019): “Magneto-hydrodynamic flow and heat transferof a hybrid nanofluidin a rotating system among two surfaces in the presence of thermal radiation and joule heating”, AIP Advances 9, 025103.
Swain, B.K, Parida B.C, Kar. S and Senapati. N, (2020): “Viscous dissipation and joule heating effect on MHD flow and heat transfer past a stretching sheet embedded in a porous medium”, Heliyon 6, e05338.
Umair Rashid, Azhar Iqbal, Haiyi Liang, Waris Khan, Muhammed Waqar, (2020): “Dynamics of water conveying zinc oxide through divergent-convergent channels with the effect of nanoparticles shape when Joule dissipation are significant”, PLOS ONE, 16, (2021).
Kotnurkar, A., Kallolikar, N. (2022): Effect of Joule heating and entropy generation on multi-slip condition of peristaltic flow of Casson nanofluid in an asymmetric channel. Journal of Biological Physics, 48, 273-293.
Khashi'ie, N.S., Wahid, N.S., Md Arifin, N. et al. (2022): MHD stagnation-point flow of hybrid nanofluid with convective heated shrinking disk, viscous dissipation and Joule heating effects, Neural computing and applications 34, 17601-17613.
