Numerical Investigation on Aerodynamic Performance of Helical Savonius Rotor Inspired by Natural Shapes

Jump To References Section

Authors

  • Bhivarabai Sawant College of Engineering and Research, Pune – 411041, Maharashtra ,IN
  • Padmabhooshan Vasantdada Patil Institute of Technology, Pune – 411021, Maharashtra ,IN
  • Jayawantrao Sawant College of Engineering, Pune – 411028, Maharashtra ,IN
  • Shrimati Kashibai Navale College of Engineering, Pune – 411041 ,IN
  • Modern College of Engineering, Pune – 411 005, Maharashtra ,IN
  • Indira College of Engineering and Management, Pune – 410 506, Maharashtra ,IN

DOI:

https://doi.org/10.18311/jmmf/2023/35859

Keywords:

CFD, Helical, Savonius Rotor, Nature Inspired Shapes for VAWT, VAWT

Abstract

There have been extensive studies conducted on Horizontal Axis Wind Turbines (HAWT) at relatively moderate to high wind speed regions. However, such detailed investigations for Vertical Axis Wind Turbines (VAWT), specifically for low wind speed terrains are amply reported. This motivates us to conduct research to explore possibilities in improving performance of VAWT in low wind speed terrains, which is attempted in the present work. This is required due to the fact that most of regions do not have sufficient extractable wind energy due to low speeds. VAWTs can perform at such low wind speed, but are less efficient. Improving efficiency of VAWT will solve the purpose. Hence, the present study is aimed at finding the performance characteristics of VAWT for low Wind speed configurations. Various parameters affecting power generation are investigated. Numerical analyses on various configurations are conducted to study the effects of twist angle, free stream velocity, number of blades. Computational results obtained have been in good agreement with the established results for semi-circular Savonius rotor profile. The results suggest that for low wind speed terrains, there is a need to explore the combination of lift and drag type of profiles, which could be used for the utilization of available wind power. Hence, naturally inspired shapes (profiles) were investigated for the possible solution of combined lift and drag type wind turbines at low speeds. The blade shape for such combined lift and drag type wind turbine were deduced from the available literature. It is well established that the naturally inspired shapes as noted in sea conch follow golden ratio in its contours. The present study provides an insight on the characteristic curves of VAWT for low wind speed terrains, effects of various geometric and flow parameters suitable for low wind speed terrains.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2023-12-20

How to Cite

Bagade, P. M., Bagade, P. P., Chaudhari, A., Ranjan, P., Shirke, S., & Sedani, C. (2023). Numerical Investigation on Aerodynamic Performance of Helical Savonius Rotor Inspired by Natural Shapes. Journal of Mines, Metals and Fuels, 71(10), 1697–1705. https://doi.org/10.18311/jmmf/2023/35859

 

References

Mauro S, Lanzafame R, Messina M. Insight into the Rotational Augmentation on HAWTs by means of CFD Simulations-Part I: State of the Art and Numerical Results. Int J Appl Eng.Res. 2017; 12(21):10491-504.

Hand B, Kelly G, Cashman A. Numerical simulation of a vertical axis wind turbine airfoil experiencing dynamic stall at high Reynolds numbers. Computers and Fluids. 2017; 149:12-30. ISSN 0045-7930, https:// doi.org/10.1016/j.compfluid. 2017.02. 021. DOI: https://doi.org/10.1016/j.compfluid.2017.02.021

S Luo, Q Sun, M. Sun, H. Sun, W. Wu and Z. Chen, Lateral control ap-proach of powered parafoils combining wind feed forward compensation with active disturbance rejection control, 2018 14th IEEE/ASME Inter-national Conference on Mechatronic and Embedded Systems and Applications (MESA), 2018; pp. 1-6, https://doi. org/10.1109/MESA.2018.8449189. DOI: https://doi.org/10.1109/MESA.2018.8449189

Li Z, Han R, Gao P, Wang C. Analysis and implementation of a drag-type vertical-axis wind turbine for small distributed wind en-ergy systems. Advances in Mechanical Engineering. 2019. https://doi. org/10.1177/1687814019825709 DOI: https://doi.org/10.1177/1687814019825709

Seralathan, Sivamani, Premkumar, Kumar T, Reddy D, Reddy V, Reddy K, Hariram V. Experimental data on analysis of a horizontal axis small wind turbine with blade tip power system using permanent magnetic generator. Data in Brief. 2019; 23:103716. https://doi. org/10.1016/j.dib.2019.103716. DOI: https://doi.org/10.1016/j.dib.2019.103716

Seidel C, Jayaram S, Kunkel L. et al. Structural Analysis of Biolog-ically Inspired Small Wind Turbine Blades. Int J Mech Mater Eng. 2017; 12:19. https://doi.org/10.1186/ s40712-017-0085-3 DOI: https://doi.org/10.1186/s40712-017-0085-3

Damota JB, de Dios Rodrıguez Garcıa J, Casanova AC, Miranda JT, Cac-cia CG, Lamas MI. Optimization of a Nature-Inspired Shape for a Vertical Axis Wind Turbine through a Numerical Model and an Artificial Neural Network. Appl Sci. 2022; 12(16):8037. https://doi. org/10.3390/app12168037 DOI: https://doi.org/10.3390/app12168037

Zakaria A, Ibrahim, MSN. Effect of twist angle on starting capability of a Savonius rotor – CFD analysis. IOP Conf Ser: Mater Sci Eng. 2020; 715:012014. https://doi. org/10.1088/1757-899X/715/1/012014 DOI: https://doi.org/10.1088/1757-899X/715/1/012014

Belkacem, Belabes, Paraschivoiu, Marius. 3D Numerical Study of Hill Mounted VAWT. 2018; https://doi. org/10.25071/10315/35326. DOI: https://doi.org/10.25071/10315/35326

Al-Shammari SA, Karamallah AH, Aljabair S. Blade Shape Optimization of Savonius Wind Turbine at Low Wind Energy by Artificial Neural network. IOP Conf Ser: Mater Sci Eng. 2020; 881012154. https://doi. org/10.1088/1757-899X/881/1/012154 DOI: https://doi.org/10.1088/1757-899X/881/1/012154

MEZIANE M, Essadiqi E, Faqir M, Ghanameh MF. CFD Study of Unsteady Flow Through Savonius Wind Turbine Clusters. International Journal of Renewable Energy Research. 2019; 9(2):657-666.

Sobczak K, Obidowski D, Reorowicz P, Marchewka E. Numerical Investigations of the Savonius Turbine with Deformable Blades, Energies. 2020; 13(14):1-20, https://EconPapers.repec.org/ RePEc:gam:jeners:v:13:y:2020:i:14:p:3717-:d:386730. DOI: https://doi.org/10.3390/en13143717

Morshed KN. Experimental and Numerical Investigations on Aerodynamic Characteristics of Savonius Wind Turbine with Various Overlap Ratios, Ph.D. Thesis, Georgia Southern University. 2010.

Hui Su, Chunwei Bi, Yunpeng, Z. Numerical analysis of the dynamic response of an integrated structure of the floating wind turbine and the fish cage to regular waves. The 9th Conference on Computational Methods in Marine Engineering. 2022. https://doi.org/10.2218/ marine2021.6796. DOI: https://doi.org/10.2218/marine2021.6796

Niyat Zadeh M, Pourfallah M, Safari Sabet S, Gholinia M, Mouloodi S, Taheri Ahangar A. Performance assessment and optimization of a helical Savonius wind turbine by modifying the Bach’s section. SN Appl Sci. 2021; 3:739. https://doi.org/10.1007/s42452-021-04731-0 DOI: https://doi.org/10.1007/s42452-021-04731-0

Prija Tjahjana DDD, Arifin, Z, Suyitno, Juwana WE, Prabowo AR, Harsito C. Experimental study of the effect of slotted blades on the Savonius wind turbine performance. Theoretical and Applied Mechanics Letters. 2021; 11(3):162-71. https://doi.org/10.3969/j.issn.2095- 0349.2021.03.008 DOI: https://doi.org/10.1016/j.taml.2021.100249

Arifin S, Sudjito S, Slamet W, Lia Y. Experimental study of combined blade savonius wind turbine. International Journal of Renewable Energy Research. 2016; 6:615-9.

Khalid M, Mounia Z, Mohammed A. Numerical Investigation of a New Modified Savonius Wind Turbines. International Journal of Renewable Energy Development. 2002; 11:1113-23. https://doi. org/10.14710/ijred.2022.45799. DOI: https://doi.org/10.14710/ijred.2022.45799

Saha, UK, Thotla S, Maity D. Optimum design configuration of Savonius rotor through wind tunnel experiments. J Wind Eng Ind Aerodyn. 2008; 96:1359–75. DOI: https://doi.org/10.1016/j.jweia.2008.03.005

Most read articles by the same author(s)