Production and characterization of titanium based metal matrix composites: a review

Jump To References Section

Authors

  • Kadir A Ajij Shaikh
     ,IN
  • Satish Babu Boppana
     ,IN
  • Vijee Kumar
     ,IN
  • Samuel Dayanand
     ,IN

DOI:

https://doi.org/10.18311/jmmf/2021/30102

Keywords:

Titanium, powder metallurgy, Ti6Al4V based composite, boron carbide, yttrium oxide, silicon carbide etc.

Abstract

Titanium alloys are regarded as high strength and lowdensity alloys. It has wide range of applications such as in biomedical and automobile because of its high strength, low density, biocompatibility and good corrosion resistance. Titanium alloys can be produced by adding elements like aluminium, vanadium, molybdenum, zirconium etc. The powder metallurgy method is widely used method for production of titanium alloys because of its low cost of production. In this study, Ti6Al4V based composites synthesized by adding various reinforcements through powder metallurgy method are considered and the results from these studies are reported.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-04-28

How to Cite

Shaikh, K. A. A., Boppana, S. B., Kumar, V., & Dayanand, S. (2022). Production and characterization of titanium based metal matrix composites: a review. Journal of Mines, Metals and Fuels, 69(12A), 195–198. https://doi.org/10.18311/jmmf/2021/30102

Issue

Volume 69, Issue 12A, December 2021

Section

Articles
Crossref
Scopus
Google Scholar
Europe PMC
Received 2022-04-27
Accepted 2022-04-27
Published 2022-04-28

 

References

Abe, J. O., Popoola, A. P. I., Popoola, O. M. and Ajenifuja, E. (2020): Microstructural, phase, hardness, and oxidation resistance studies of AlN/h-BNreinforced Ti6Al4V matrix composites synthesized by spark plasma sintering. The International Journal of Advanced Manufacturing Technology, 107(7), 29852994.

Anandajothi, M., Ramanathan, S., Ananthi, V. and Narayanasamy, P. (2017): Fabrication and characterization of Ti6Al4V/TiB2-TiC composites by powder metallurgy method. Rare Metals, 36(10), 806811.

Bharath, V., Auradi, V., Nagaral, M. and Bopanna, S. B. (2020): Influence of alumina percentage on microstructure, mechanical and wear behaviour of 2014 aluminium-alumina metal matrix composites. Jurnal Tribologi, 25, 29-44.

Boppana, S. B. (2019): In situ synthesis of titanium carbide in pure aluminium. Journal of Materials Science and Chemical Engineering, 8(1), 1-10.

Boppana, S. B., Dayanand, S., Kumar, M. A., Kumar, V. and Aravinda, T. (2020a): Synthesis and characterization of nano graphene and ZrO2 reinforced Al 6061 metal matrix composites. Journal of Materials Research and Technology, 9(4), 7354-7362.

Boppana, S. B., Dayanand, S., Murthy, B. V., Nagaral, M., Telagu, A., Kumar, V. and Auradi, V. (2021): Development and Mechanical Characterisation of Al6061-Al2O3-Graphene Hybrid Metal Matrix Composites. Journal of Composites Science, 5(6), 155.

Boppana, S. B., Dayanand, S., Ramesh, S. and Auradi, V. (2020b): Effect of Reaction Holding Time on Synthesis and Characterization of AlB2 Reinforced Al6061 Metal Matrix Composites. Journal of Bio-and Tribo-Corrosion, 6(3), 1-10.

Hagiwara, M., Arimoto, N., Emura, S., Kawabe, Y. and Suzuki, H. G. (1992): Mechanical properties of particulate reinforced titanium-based metal matrix composites produced by the blended elemental P/M route. ISIJ international, 32(8), 909-916.

Kgoete, F. M., Popoola, A. P. I. and Fayomi, O. S. I. (2018): Influence of spark plasma sintering on microstructure and corrosion behaviour of Ti-6Al-4V alloy reinforced with micron-sized Si3N4 powder. Defence Technology, 14(5), 403-407.

Kundu, S., Hussain, M., Kumar, V., Kumar, S. and Das, A. K. (2018): Direct metal laser sintering of TiN reinforced Ti6Al4V alloy-based metal matrix composite: Fabrication and characterization. The International Journal of Advanced Manufacturing Technology, 97(5), 2635-2646.

Poletti, C., Balog, M., Schubert, T., Liedtke, V. and Edtmaier, C. (2008): Production of titanium matrix composites reinforced with SiC particles. Composites Science and Technology, 68(9), 2171-2177.

Prakash, K. S., Gopal, P. M., Anburose, D. and Kavimani, V. (2018): Mechanical, corrosion and wear characteristics of powder metallurgy processed Ti-6Al-4V/B4C metal matrix composites. Ain Shams Engineering Journal, 9(4), 1489-1496.

Ramaswamy, R., Selvam, B., Marimuthu, P. and Elango, N. (2018): Investigation of densification behaviour on yttrium oxide reinforced Ti-6Al-4V nano-composite through powder metallurgy. Int J Mech Prod Eng Res Dev, 8(2), 433-442.

Semetse, L., Obadele, B. A., Raganya, L. and Olubambi, P. A. (2020): Wear studies of spark plasma sintered ZrO2 reinforced Ti-6Al-4V alloy. Materials Today: Proceedings, 28, 468-474.