Volume 70, Issue 8A, August 2022
Published:
2023-03-15
Articles
-
Investigations on IC Engine Piston Ring made of Composite Materials
Keywords:
Piston Ring, Finite Element Analysis, SiC Reinforced ZrB2, A360, A2618. -
An Overview of Nano-Catalysts in Biodiesel Production
Keywords:
Biodiesel, Nanoparticles, Reaction Speed, Mass Transport Properties. -
Corrosion Characterization of Friction Stir Weld Dissimilar Aluminium Alloy Joints
Keywords:
Potentiodynamic, Aluminium Alloys, Characterization, Corrosion, Friction Stir Welding, Dissimilar. -
Microhardness and Microstructure of Thin-Film Metallic and Non-Metallic Coating on Fiber Reinforced Polymer Substrate
Keywords:
Fiber Reinforced Polymer, Plasma Coating, Micro-Hardness, Micro-Structure, Metallization. -
Outlook of Density Maximum on the Onset of Forchheimer-Bénard Convection with throughflow
Keywords:
Convection, Maximum Density, Porous Medium, Vertical Throughflow, Galerkin Technique. -
A Performance Study on Heat Transfer Using Different Heat Sink by Experimentation and Optimization Method
Keywords:
Forced Convection, Heat Sink, Heat Transfer, Optimization, Taguchi. -
QSPR Analysis of Polycyclic Aromatic Hydrocarbons
Keywords:
Equitable Zagreb Index, Polynomial, Polycyclic Aromatic Hydrocarbon. -
The Effect of MWCNT and GNP on the Flame Retardant Properties of Glass Fiber Reinforced Composites
Keywords:
Flame Parameters, Nanomaterials, Cone Calorimetry, Nanotechnology. -
Comparative Study on the Effect of Aluminium Trihydrate and Carbon Nanofillers on Thermal Properties of Glass Fiber Reinforced Epoxy Composites
Keywords:
Differential Scanning Calorimetry, Thermal Kinetics, GFRP Composites. -
Green Synthesis of MgO Nanoparticles Using Caesalpinia Sappan Seeds and their Application for Direct Conversion of Alcohol to Azide
Keywords:
Caesalpinia Sappan, Green Synthesis, MgO NPs, ADMP and Amino Alkyl Azide. -
A Review on Non-Linear and Mathematical Modelling for Stiffness Characteristics of Linear Motion Guide Ways
Keywords:
Linear Motion Guideways, Rolling Element, Stiffness, Combined Stiffness, Non-Linear Behaviour, Mathematical Model. -
Effect of Process Parameters on Tensile Behaviour of FSW AA 6061-AA 7075 Reinforced with TiO2 Particles Using Statistical Approach
Keywords:
ANOVA, Friction Stir Welding, Larger is Better, Orthogonal Array, Taguchi Technique. -
Microstructure, Physical and Tensile Behaviour of B4C Particles Reinforced Al7010 Alloy Composites
Keywords:
Al7010 Alloy, B4C, Microstructure, Hardness, Tensile Behaviour, Fractography. -
Influence of Casting Die Diameter Size on Microstructure and Mechanical Fractrography of Al-7Si Alloy with Flyash and Graphite Composites
Keywords:
Al-7Si Alloy, Graphite, Fly Ash, Microstructure, Tensile Strength, Hardness. -
Studies on Effective Usage of SAP ERP Tool to Control Materials Planned Delivery Time in Oil and Gas Industries
Keywords:
SAP ERP Tool, Planned Delivery Time, Materials Planning, Master Production Schedule and Capacity Planning. -
Regenerative Electric Aircraft Taxi System
Keywords:
Electrification, Fuel Efficiency, Electric Motor, Fuel Consumption. -
Performance Analysis of Solar Water Heater with Various Working Fluids
Keywords:
Heat Pipe, Exergy Analysis, Latent Heat, Thermosyphon Water Heating System. -
Experimental Investigation on Comparing Mechanical Properties in 3D Printed Polymers by Varying Process Parameter
Keywords:
3D Printing, Flexural & Tensile Characterization. -
Green Synthesis, Characterization and Electrical Properties of Iron Doped Vanadium Oxide for Strain Gauges
Keywords:
Nanoparticles, Vanadium Oxide, Iron, Electrical Properties, Strain Gauge. -
Mechanical Characterization of Balsa Wood, Depron and Glass Fiber Composite for Aircraft Floor Panel and Luggage Compartment
Keywords:
Balsa Wood, Depron, E-Glass Fibre. -
Study of Electrical and Magnetic Properties of Zn-Co-Ferrite Nanocomposites
Keywords:
Soft Magnetic Materials, Combustion Synthesis Method, Permeability, Resistivity and Dielectric Constant. -
Design and Fabrication of Multi-Utility Spraying UAV
Keywords:
Autonomous Agricultural Drone, Spraying Pesticides, Aerial Mapping, Crop Health Monitoring. -
Influence of Hot Forging and Heat Treatment on Mechanical Properties of D-Series Cutting Tools
Keywords:
D2 and D3 Steel Tool, Forging, Heat Treatment, Hardness, Impact Strength, Wear Resistance, Micostructure. -
Preparation and Evaluation of Hardness and Wear Properties of WC-Co Particulates Reinforced 7075Al Composites
Keywords:
Aluminium, Metal Matrix Composites, Tungsten Carbide, Wear and Hardness. -
Mechanical Characterization of Hybrid Polymer Composite for Marine Application
Keywords:
No Keywords. -
Wear Characteristics of Hybrid Polymer Composite Manufactured by Hand Layup Technique Using Fuzzy Logic Systems
Keywords:
No Keywords. -
Finite Element Analysis of Hybrid Skin Sandwich Composite
Keywords:
Sandwich Structured Composite, Aluminium Alloy, Areca Fibre, ANSYS Mechanical APDL. -
Experimental Investigation on Drilling of Fiber Metal Laminates Using Grey Based Taguchi Approach
Keywords:
FML, Delamination, Drill Geometry, Drilling, Cutting Parameters, ANOVA. -
Impact of Stock Splits on Stock Returns and Liquidity of the Selected Firms : A Study from NSE
Keywords:
Stock Splits, Abnormal Return, Liquidity and Derivatives. -
Force Sensitive Resistors : A New and Emerging Field of Research in Conducting Polymers
Keywords:
Conducting Polymers, Force Sensitive Resistors, Carbon Fillers, Electrical Percolation, Force Sensor, Quantum Tunnelling. -
Novel Coir/Chitosan Composites for Packaging Applications
Keywords:
Biomaterials, Composite materials, Organic, Laminates -
Structural, Optical and Electrical Properties of ATO Nanoparticles Synthesized by Combustion Method
Keywords:
Green synthesis, antimony doped tin oxide (ATO), nanoparticles, combustion method -
Design Optimization of Electrical Connector Assembly using FEA
Keywords:
Electrical Connector, housing latch, ANSYS Mechanical APDL -
Statistical Analysis of Friction-Stir Welding of Al- 6063 Alloys
Keywords:
Aluminum 6063 alloy, FSW, Hardness, Fractography, Minitab-17 analysis -
Temperature Effect on Non-Vacuum Solid State Diffusion Bonded Joints of Al 2014
Keywords:
Inter-diffusion, solid state bonding, TLP bonding, interface, microstructure -
Multi-Objective Optimization of Plate-Fin Heat Exchanger Using Taguchi-based Grey Relational Analysis
Keywords:
Design constraints, Reynolds’s no, Nusselt no, core area, core length, fin height, friction factor, taguchi, Response surface methodology -
Experimental Investigations to Study the Influence of Thickness and Speed of Aluminum Discs on Brake Parameters with Neodymium – Iron – Boron Magnets
Keywords:
Eddy current; Permanent magnets; NdFeB magnets; Aluminum; percentage of reduction in speed; Negative acceleration; time consumed -
Investigation on Strain Sensitivity and Temperature Behaviour of Nitrogen Doped 3C-SiC Thin Films
Keywords:
LPCVD, MTS, 3C-SiC thin film, TCR, strain sensitivity -
Effect of Hybrid Fillers on Electrical, Thermal and Mechanical Properties of Glass Epoxy Composites
Keywords:
Epoxy resin, micro and nano fillers, electrical properties, thermal properties, mechanical properties -
Cyclic Thermomechanical Analysis of Polyethylene Glycol Based Shape Memory Polymers
Keywords:
Shape Memory Polymers, Cyclic thermomechanical test, Dynamic mechanical analysis, Shape Fixity, Shape Recovery -
Comparative Studies on Solar Assisted Silica Gel- Water and Activated Carbon-Methanol Based Adsorption Refrigeration System
Keywords:
Refrigeration, adsorption, Solar energy, working pair, COP -
Experimental Investigations and Numerical Modelling of Compression Ignition Engine Fuelled With Diesel and Biodiesel Blend
Keywords:
Dual fuel, waste coconut oil, CFD, FORTE, Performance -
Advances in the Study of Phase Change Materials and Ne-PCMs for the Storage of Energy Applications
Keywords:
PCM, Ne-PCM, Synthesis of PCM, Solar energy -
Agricultural Pest and Disease Detection in Banana Plant
Keywords:
Image processing, TensorFlow lite, RGB 3D Color model, gray scale image, Object detection -
Characterization and Evaluation of Shape Memory Effect of Cu-Zn-Al Shape Memory Alloy
Keywords:
Shape Memory Alloy; Shape Memory Effect; Cu-Zn-Al; Martensite -
FEA and Experimental Investigation of Prosthetic Knee Joint
Keywords:
Finite element analysis, Polariscope, Knee joint, Tibial, Femur, Flexion angle, Sagittal radius -
Comparative Analysis of LUO Converter with and Without MPPT for PV Applications
Keywords:
Power consumption, Luo Converter, MPPT, Photovoltaic panel -
Quality Management Systems Implementation In Tmeic Motor Factory
Abstract views: 105 times| Download: 102 times| https://doi.org/10.18311/jmmf/2022/31996 -
A Review Article on FeMnAlNi Shape Memory Alloy
Keywords:
Shape memory alloy, Superelasticity, FeMnAlNi alloy -
Computation of the Aerodynamic Forces, Design and Development of an Orinthopter
Keywords:
Aerodynamic forces, ornithopter, micro aerial vehicles, flapping-wing model -
Impact of Ordering Decisions on Performance of a Supply Chain – An Experimental and Simulation Study
Keywords:
Supply chain, inventory policies, supply chain performance -
GO: Ag Composites Materials for Dynamic Humidity Sensing Applications
Keywords:
Graphene oxide, silver crystallite, composites, Scherrer formula, Rietveld refinement, Inter-Digitated Electrodes(IDE), humidity sensor -
Ambulance Path Clearance System With Health Monitoring Using Internet of Things
Keywords:
RF Technology, Internet of Things, Ambulance, Health Monitoring, Webpage -
Review on Mechanical Characteristics of Kevlar Composites
Keywords:
Review, Aramid Fiber, Natural Fiber, Mechanical Characteristics -
A Thermodynamic Study of a Conventional 500 MW Coal Fired Power Plant Hybridized with Solar Energy
Abstract views: 122 times| Download: 92 times| https://doi.org/10.18311/jmmf/2022/32006 -
Investigations into Effect of Cutting Conditions On Surface Roughness Under MQL Turning of AISI 4340 by ANN Models
Keywords:
MQL, ANN, Surface roughness -
Effect on Various Parameter of Stainless Steel 316L Weld Bead Geometry using Cold Metal Transfer (CMT) Process
Keywords:
CMT, Stainless steel 316L, Process Parameters & Weld bead geometry -
Investigation of Mechanical Behaviour of Polypropylene Based Composite
Keywords:
Polypropylene, nylon 6,6, Injection molding, Compression strength, Impact strength -
Optimal Design of Steel Planar Trusses Using Ant Lion Algorithm
Abstract views: 129 times| Download: 105 times| https://doi.org/10.18311/jmmf/2022/32021 -
A Review on Understanding the Crystallization Process of Bioglass in Recent Decade
Keywords:
Bioglass, crystallization kinetics, Differential Scanning Calorimetry (DSC), X-Ray Diffraction Analysis (XRD), Microscopy. -
Study on Influence of Process Parameters and Insert Nose Radius on Surface Roughness in Turning Operation
Keywords:
Surface roughness, Taguchi, ANOVA, process parameters, insert nose radius -
Aerodynamics Study of The Formula SAE Car using Analytical Approach
Keywords:
suspension system, Aerodynamics, simulations -
Modelling, Temperature Analysis, and Mechanical Properties of Friction Stir Welding of Al-Cu Joints with Hardened OHNS Steel Tools
Keywords:
Friction Stir Welding, Solid Modelling, Hardened OHNS steel tool, welding tool pin form, temperature distribution -
Design and Optimization of Friction Stir Welding of Al-Cu BUTT Joint Configuration using Taguchi Method
Keywords:
Friction stir welding; Hardened OHNS steel tool; tool pin offset; Taguchi L9 orthogonal array; ANOVA