Volume 70, Issue 3A, March 2022

Articles

• Arduino Based Automatic Irrigation Control System By Utilizing Moisture Content

  S. B. Arun, K. B. Nandan, P. Harsha Vardhan, T. M. Rajath (Author)

  1-4

  Keywords:

  Arduino based automatic irrigation control system, global worming, famine, drought, moisture sensor, GHG.

  • PDF ¹⁸

  Abstract views: 45 times| Download: 18 times| https://doi.org/10.18311/jmmf/2022/30659

• Taguchi Assessment On The Effects Of Heat Treatment Variable On The Hardness And Tensile Strength Of Silicon Carbide Reinforced A357 Hybrid Composites

  K. Yathiraj, G. J. Naveen, M. H. Annaiah (Author)

  5-9

  Keywords:

  Taguchi assessment, sustaining temperature, reinforcement, composite material, mechanical statistics, systematic examination, signal-to-noise ratios.

  • PDF ⁴

  Abstract views: 14 times| Download: 4 times| https://doi.org/10.18311/jmmf/2022/30660

• Taguchi Predictions On Wear And Heat Treatment Of A357 Based Hybrid Metal Matrix Composites

  K. Yathiraj, G. J. Naveen, M. H. Annaiah (Author)

  10-14

  Keywords:

  Hybrid metal matrix composite, heat treatment parameter, wear factor, taguchi, ANOVA, signalto- noise ratio.

  • PDF ¹⁴

  Abstract views: 18 times| Download: 14 times| https://doi.org/10.18311/jmmf/2022/30661

• Effect Of Gap Ratio On Flow Influenced Actions Of Two Circular Cylinders In Side-By-Side Arrangement

  Sudip Chakraborty, Saikat Chaterjee, Ranjan Kumar (Author)

  15-20

  Keywords:

  Flow induced vibration, CFD, gap ratio, FEM, fluid-structure interface.

  • PDF ¹⁰

  Abstract views: 18 times| Download: 10 times| https://doi.org/10.18311/jmmf/2022/30662

• An Artificial Intelligent Prediction Model For Evaluating The Engine Performance And Emission Characteristics Using Waste Cooking Oil Biodiesel Blends

  Venkata Ramesh Mamilla, S. Bhagavan Sreedhar, Padilam Rama Krishna (Author)

  21-27

  Keywords:

  ANN, performance, diesel engine, exhaust emission, waste cooking oil methyl ester.

  • PDF ¹⁰

  Abstract views: 12 times| Download: 10 times| https://doi.org/10.18311/jmmf/2022/30663

• Ferroconvection In A Sparsely Distributed Porous Medium With Time-Dependent Sinusoidal Magnetic Field

  C. Balaji, C. Rudresha, V. Vidya Shree, S. Maruthamanikandan (Author)

  28-34

  Keywords:

  Ferromagnetic fluid, magnetic field modulation, perturbation method, stability, porous medium.

  • PDF ¹²

  Abstract views: 20 times| Download: 12 times| https://doi.org/10.18311/jmmf/2022/30664

• Effect Of Electric Field Modulation On Electroconvection In A Dielectric Fluid-Saturated Porous Medium

  C. Rudresha, C. Balaji, V. Vidya Shree, S. Maruthamanikandan (Author)

  35-41

  Keywords:

  Convection, Darcy-Brinkman model, dielectric fluid, electric field, modulation.

  • PDF ¹⁵

  Abstract views: 23 times| Download: 15 times| https://doi.org/10.18311/jmmf/2022/30665

• Experimental Investigations of Vibration Characteristics of Jute Fibre Polymer Composites

  A. B. Vinayaka Patil, Prashanth Banakar, K. Lokesha (Author)

  42-45

  Keywords:

  Natural fibre reinforced polymer, jute, damping factor, polyester resin, maleic anhydride.

  • PDF ⁷

  Abstract views: 10 times| Download: 7 times| https://doi.org/10.18311/jmmf/2022/30666

• Optimization Of Machining Parameters In Machining Nimonic C-263 By WEDM Process

  K. Satish, V. R. Srinivasan, C. P. S. Prakash (Author)

  46-51

  Keywords:

  Nimonic C-263, WEDM, MINITAB, ANOVA, SN ratios.

  • PDF ⁷

  Abstract views: 14 times| Download: 7 times| https://doi.org/10.18311/jmmf/2022/30667

• A Comparative Study On Sliding Wear Behaviour Of Post-Cured Hybrid Reinforced Polymer Composites

  Vithal Rao Chavan, Veerabhadrappa Algur, K. Veeresh, K. R. Dinesh (Author)

  52-56

  Keywords:

  Post-curing, GFRP, wear loss, surface roughness, pin-on-disc testing machine.

  • PDF ¹¹

  Abstract views: 10 times| Download: 11 times| https://doi.org/10.18311/jmmf/2022/30668

• Wear Behaviour Of Modified ZA-27 Alloy: A Statistical Analysis

  Poornima Hulipalled, Veerabhadrappa Algur, V. Lokesha, S. Naveen (Author)

  57-60

  Keywords:

  ANOVA, mixed design, orthogonal array, pinon- disc testing machine, wear loss.

  • PDF ¹⁰

  Abstract views: 16 times| Download: 10 times| https://doi.org/10.18311/jmmf/2022/30669

• Investigation Of Mode II Interlaminar Fracture Toughness Of Silicon-Di-Oxide Filled Glass Fiber Reinforced Epoxy Composites

  B. K. Sriranga, L. J. Kirthan, Arun A. Magadum, Vishwanath Patil (Author)

  61-67

  Keywords:

  Interlaminar fracture toughness, shear precrack, mode II test method, mode II crack growth.

  • PDF ¹⁰

  Abstract views: 23 times| Download: 10 times| https://doi.org/10.18311/jmmf/2022/30670

• Ferroconvection In A Horizontal Darcy-Brinkman Porous Medium With Radiative Transfer

  Soya Mathew, Nisha Mary Thomas, S. Maruthamanikandan (Author)

  68-77

  Keywords:

  Ferrofluid, thermal radiation, porous media, magnetic field.

  • PDF ⁶

  Abstract views: 10 times| Download: 6 times| https://doi.org/10.18311/jmmf/2022/30671

• Effect of Time-Dependent Sinusoidal Boundary Temperatures on the Onset Of Ferroconvection in a Porous Medium

  Nisha Mary Thomas, Soya Mathew, S. Maruthamanikandan (Author)

  78-83

  Keywords:

  Ferrofluid, porous media, magnetic field, temperature modulation.

  • PDF ³

  Abstract views: 8 times| Download: 3 times| https://doi.org/10.18311/jmmf/2022/30672

• Application Of High Velocity Oxy-Fuel Technique To Combat Surface Degradation In Power Generation Industry – A Review

  Deepak Dhand, Jasmaninder Singh Grewal, Parlad Kumar (Author)

  84-91

  Keywords:

  Corrosion, wear, HVOF, steel, surface, thermal spray, etc.

  • PDF ⁵

  Abstract views: 4 times| Download: 5 times| https://doi.org/10.18311/jmmf/2022/30673

• Optimization of AL₂O₃ Concentration In Water Based Nano Fluid To Enhance The Heat Transfer For Solar Application

  Kusammanavar Basavaraj, K. Elangovan, S. Shankar (Author)

  92-97

  Keywords:

  Nano-fluid, heat transfer, nussellt number, CFD, solar application.

  • PDF ⁷

  Abstract views: 9 times| Download: 7 times| https://doi.org/10.18311/jmmf/2022/30674

• Effect Of MFD Viscosity On Ferroconvection In A Fluid Saturated Porous Medium With Variable Gravity

  V. Vidya Shree, C. Rudresha, C. Balaji, S. Maruthamanikandan (Author)

  98-103

  Keywords:

  Ferrofluid, MFD viscosity, porous media, magnetic field, variable gravity.

  • PDF ¹⁰

  Abstract views: 13 times| Download: 10 times| https://doi.org/10.18311/jmmf/2022/30675

• Bearing Fault Classification Using Statistical Features And Machine Learning Approach

  G. Manjunatha, H. C. Chittappa (Author)

  104-107

  Keywords:

  Bearing fault, diagnosis, ANN, classifiers, statistical features.

  • PDF ⁵

  Abstract views: 6 times| Download: 5 times| https://doi.org/10.18311/jmmf/2022/30687

• Effect Of Tool Pin Profiles On Surface Roughness Of Friction Stir Welded 2050-T84 Al-Cu-Li Alloys

  Sanjeev Kumar, Durjyodhan Sethi, Smrity Choudhury, Rahul Das, Subhash Chandra Saha, Barnik Saha Roy (Author)

  108-113

  Keywords:

  2050-T84Al-Cu-Li alloy, friction stir welding, tool pin profile, surface roughness, tensile properties.

  • PDF ¹⁰

  Abstract views: 13 times| Download: 10 times| https://doi.org/10.18311/jmmf/2022/30677

• Study On Partial Replacement Of E-Plastic Waste As Coarse Aggregates

  M. Roopa, Sriraksha R. Das, M. Sanjana, B. S. Thungashree (Author)

  114-119

  Keywords:

  Solid waste, workable concrete, less dense concrete, efficient disposal.

  • PDF ⁵

  Abstract views: 18 times| Download: 5 times| https://doi.org/10.18311/jmmf/2022/30678

• Dynamic Behaviour Of Geodesic Dome Structure For Different Time Histories

  M. Roopa, V. Priyanka, H. Venugopal (Author)

  120-123

  Keywords:

  Time histories, geodesic dome, FEA, dynamic analysis.

  • PDF ¹⁶

  Abstract views: 11 times| Download: 16 times| https://doi.org/10.18311/jmmf/2022/30679

• Sensitivity Variation Of A Flowmeter With Varying Shapes Of The Target

  K. L. Kumaraswamy, T. Krishna Rao (Author)

  124-126

  Keywords:

  Flow rate, tensor flow, coefficient of discharge, target flow.

  • PDF ⁸

  Abstract views: 19 times| Download: 8 times| https://doi.org/10.18311/jmmf/2022/30680

• An Overview Of Direct Metal Laser Sintering (DMLS) Technology For Metal 3D Printing

  Prashant S. Humnabad, R. Tarun, Indraneel Das (Author)

  127-133

  Keywords:

  Additive manufacturing, direct metal laser sintering, metal 3D printing.

  • PDF ³⁰

  Abstract views: 9 times| Download: 30 times| https://doi.org/10.18311/jmmf/2022/30681

• Optimal Design Of Smart Grid Renewable Energy System Using Homer Programme

  C. Siddaraju, S. Deepak, H. S. Balasubramanya (Author)

  134-137

  Keywords:

  Homer software, smart grids, india, renewable resources, energy access, optimization model.

  • PDF ¹¹

  Abstract views: 10 times| Download: 11 times| https://doi.org/10.18311/jmmf/2022/30682

• Microstructural Characterization, Mechanical And Wear Behaviour Of Al2024-B4C Composites For Aerospace Applications

  V. N. Akanksh, Pranav Hegde, S. Siddharth, A. B. Manjunath, C. Siddaraju, Madeva Nagaral (Author)

  138-142

  Keywords:

  Microstructure, mechanical and wear behaviour, composite technology, AL2024–B4C

  • PDF ¹¹

  Abstract views: 33 times| Download: 11 times| https://doi.org/10.18311/jmmf/2022/30683

• Fatigue Studies On Aluminum 6061/SiC Reinforcement Metal Matrix Composites

  Prashant S. Humnabad, M. B. Hanamantraygouda, S. B. Halesh (Author)

  143-147

  Keywords:

  Fatigue, forging, wohler curves, silicon carbide, reinforcement.

  • PDF ⁹

  Abstract views: 23 times| Download: 9 times| https://doi.org/10.18311/jmmf/2022/30684

• An Experimental Investigation Of Central Injection Based Hydrogen Dual Fuel Spark Ignition Engine

  Pavan J. Gowdal, R. Rakshith, S. Akhilesh, Manjunath ., Ananth S. Iyengar (Author)

  148-152

  Keywords:

  Spark ignition engine, hydrogen central injection, brake thermal efficiency, brake specific fuel consumption.

  • PDF ⁴

  Abstract views: 25 times| Download: 4 times| https://doi.org/10.18311/jmmf/2022/30685

• Effect Of Climatic Conditions On Performance Of ORC Using Environment-Friendly Working Fluids – Special Reference To India

  Ananth S. Iyengar, Pritam Bhat, Pavan Kumar Reddy, B. S. Dayananda, N. Abhilash (Author)

  153-157

  Keywords:

  Organic rankine cycle, organic working fluid, condenser performance, heat transfer rate.

  • PDF ³

  Abstract views: 7 times| Download: 3 times| https://doi.org/10.18311/jmmf/2022/30686