Measuring Deformation of Deep Drawing of Various Alloys by Image Processing Using Matlab

Jump To References Section

Authors

  • St. Peter’s Institute of Higher Education and Research, Chennai ,IN
  • Department of Mechanical Engineering, St. Peter’s Institute of Higher Education and Research, Chennai ,IN
  • Department of Production Technology, MIT, Chennai ,IN
  • Department of Mechanical Engineering, Saveetha School of Engineering, SIMATS, Chennai ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/31039

Keywords:

Deep Drawing, Strain, Deformation, Image Processing, Matlab, Alloys.

Abstract

Measuring deformation mostly is based on the contact type of measurements which utilize the gauges and instruments. But this type of contact will lead to error in the precise measurement because of errors by the contact, measuring instruments, and human. So, feel proud to introduce image processing in the field of measurement. Here, in this study deals the measurement of deformation of deep drawing specimen by image processing which is called as contact free method. This is invasive method of measurement in two dimensions.Deep drawing process is an important sheet metal forming in which flat sheet metal had been forced through the die in association with the forward punch force and opposing blank holder force. As the blank passes through the tool set converts 2D bank into 3D cup formation. The process of achieving the required diameter of the cup can be produced in single stage or multistage operation. In this study, experimental study had been conducted on single stage deep drawing process for assessment of deformation and strain in aluminum alloy, copper alloy and brass alloy. Cylindrical cup deep drawing experimental tests were performed with blank of 60 x 60 square plate with 1 mm thickness. Eventually this new approach will help to optimize the geometry parameters deep drawing specimen correlation with the Matlab results.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2022-10-01

How to Cite

Prabaharan, T., Periyaswamy, P., Mugendiran, V., & Bovas Herbert Bejaxhin, A. (2022). Measuring Deformation of Deep Drawing of Various Alloys by Image Processing Using Matlab. Journal of Mines, Metals and Fuels, 70(10A), 1–8. https://doi.org/10.18311/jmmf/2022/31039

 

References

Mohammed Abbadeni, Ibrahim Zidane, Hamou Zahloul, Zakaria Madaoui. Comparative study of conventional and hydromechanical deep drawing processes based on finite element analysis. Frattura ed Integrità Strutturale Journal. 2019. (ref) Malikov, V. & Ossenbrink, R. & Viehweger, B. & Michailov, Vesselin. (2013). Experimental study of the change of stiffness properties during deep drawing of structured sheet metal. Journal of Materials Processing Technology. 213. 1811–1817. 10.1016/j.jmatprotec.2013.05.005.

Prabaharan T, Periasamy P, Ramanan N and Naveen E: Experimental Study of Plane Displacement and Strain Measurement Using Digital Image Correlation In Matlab and Validation by Ansys, International Journal of Mechanical Engineering and Technology, 9(13), 2018, pp. 1378–1389.ISSN Print: 0976-6340 and ISSN Online: 0976-6359.

T. Prabaharan, P. Periasamy, V. Mugendiran, and M. Varsha Shree, “Influence of image pixels and image contrasts in computing 2D geometrical properties using MATLAB”, AIP Conference Proceedings 2283, 020035 (2020) https://doi.org/10.1063/5.0025041 DOI: https://doi.org/10.1063/5.0025041

Contribution of Bone Tissue Modulus to Breast Cancer Metastasis to Bone Scott, A. Guelcher & Julie A. Sterling, Cancer Microenvironment (2011) 4:247–259, DOI 10.1007/s12307-011-0078-3, https://www.researchgate.net/publication/51521712, Springer Science + Business Media B.V. (outside the USA) 2011. DOI: https://doi.org/10.1007/s12307-011-0078-3

Photogrammetry-based 3D scanning for supporting design activities and testing in early stage product development, Sampsa Kohtalaa Jørgen F. Erichsena Ole Petter Wullumb Martin Steinerta, Procedia CIRP, Volume 100, 2021, Pages 762-767, https://doi.org/10.1016/j.procir.2021.05.047 DOI: https://doi.org/10.1016/j.procir.2021.05.047

Sheet Metal Deep Drawing for Making Metallic Parts and Structures, ShuhuiLi, Encyclopedia of Materials: Metals and Alloys, Volume 4, 2022, Pages 182-196,https://doi.org/10.1016/B978-0-12-819726-4.00011-9 DOI: https://doi.org/10.1016/B978-0-12-819726-4.00011-9

Standard hand book of machine design by Joseph E. Shigley, Charles R. Mischke, McGraw-Hill,ISBN 0-07-056958-4.

Muthu Mekala N, Balamurugan C, Bovas Herbert Bejaxhin, “Deform 3D Simulation and Experimental Investigation of Fixtures with Support Heads”, MECHANIKA. 2022 Volume 28(2): 130"138, ISSN 1392"1207. http://dx.doi.org/10.5755/j02.mech.29468. DOI: https://doi.org/10.5755/j02.mech.29468

A. Bovas Herbert Bejaxhin, G.M. Balamurugan, S.M. Sivagami, K. Ramkumar, V. Vijayan and S. Rajkumar, “Tribological Behaviour and Analysis on Surface Roughness of CNC Milled Dual Heat Treated Al6061 Composites”, Advances in Materials Science and Engineering, Volume 2021, Article ID 3844194, 14 pages, https://doi.org/10.1155/2021/3844194. DOI: https://doi.org/10.1155/2021/3844194

J Jones Praveen, M Vinosh, A Bovas Herbert Bejaxhin, G Paulraj, “Embedded effect of ZrB2-Si3N4 on tribological behaviour of Al 8011 metal matrix composite”, Materials Today: Proceedings, Elsevier. https://doi.org/10.1016/j.matpr.2020.10.954. DOI: https://doi.org/10.1016/j.matpr.2020.10.954

Vasudeva Rao, P. Periyaswamy, A. Bovas Herbert Bejaxhin ,E. Naveen, N. Ramanan, and Aklilu Teklemariam, Wear Behavioural Study of Hexagonal Boron Nitride and Cubic Boron Nitride-Reinforced Aluminum MMC with Sample Analysis, Hindawi, Journal of Nanomaterials, Volume 2022, Article ID 7816372, 10 pages, https://doi.org/10.1155/2022/7816372. DOI: https://doi.org/10.1155/2022/7816372

L. Natrayan, M. Ravichandran, DhinakaranVeeman, P. Sureshkumar, T. Jagadeesha, R. Suryanarayanan, Wubishet Degife Mammo, “Enhancement of Mechanical Properties on Novel Friction Stir Welded Al-Mg-Zn Alloy Joints Reinforced with Nano-SiC Particles”, Journal of Nanomaterials, vol. 2021, pp. 1-10, 2021. https://doi.org/10.1155/2021/2555525 DOI: https://doi.org/10.1155/2021/2555525

L.Natrayan, V. Sivaprakash and M. S. Santhosh. “Mechanical, Microstructure and wear behaviour of the material AA6061 reinforced SiC with different leaf ashes using advanced stir casting method.” International Journal of Engineering and Advanced Technology, vol. 8, pp. 366-371, 2018

L.Natrayan, M. S. Santhosh, R. Mohanraj, and R. Hariharan. “Mechanical and Tribological Behaviour of Al2O3 & SiC Reinforced Aluminium Composites Fabricated via Powder Metallurgy”. IOP Conf. Ser. Mater. Sci. Eng, vol. 561, no.1, pp. 012038, 2019. DOI: https://doi.org/10.1088/1757-899X/561/1/012038