A Review on Tensile, Microhardness and Microstructural Properties of Aluminum AA2219 Alloy Joints Obtained by Friction Stir Welding Process.

Jump To References Section

Authors

  • School of Mechanical Engineering, REVA University Bengaluru, Karnataka. ,IN
  • School of Mechanical Engineering, REVA University Bengaluru, Karnataka. ,IN

DOI:

https://doi.org/10.18311/jmmf/2022/32758

Keywords:

AA2219 aluminum alloy: FSW: Tensile properties: Hardness: Microstructure: Joint characterization.

Abstract

A high strength of aluminium alloy is entitled AA2219. It has been majorly used in aircraft and the construction of cryogenic fuel tanks in missiles. A novel solid-state joining technique named as friction stir welding (FSW) has been proven to be capable of joining advanced materials like AA2219 alloy with better quality of joints. Various researchers are studied the joint properties of FSW and reported better corrosion resistance, natural heat protection, microstructural and mechanical properties. This review study emphasizes various joint characteristics of AA2219 alloy, such as tensile, microhardness, and microstructural characteristics of joints are obtained by FSW.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2023-03-15

How to Cite

Biradar, R., & Patil, S. (2023). A Review on Tensile, Microhardness and Microstructural Properties of Aluminum AA2219 Alloy Joints Obtained by Friction Stir Welding Process. Journal of Mines, Metals and Fuels, 70(10A), 238–242. https://doi.org/10.18311/jmmf/2022/32758

 

References

Fawad Tariq, Nausheen Naz, Rasheed Ahmed Baloch, Faisal (2012), “Characterization of Material Properties of 2xxx Series Al-Alloys by Non-Destructive Testing Techniques”, J Non-destructive Eval, 31:17–33 DOI: https://doi.org/10.1007/s10921-011-0117-5

Sachin Kumar, Narendranath, S. & Chakradhar, D (2019), “Microstructure, Hardness and Tensile Properties of Friction Stir Welded Aluminum Matrix Composite Reinforced with SiC and Fly Ash”, Silicon 11(6): 2557–2565 DOI: https://doi.org/10.1007/s12633-018-0044-5

Sachin Kumar, Narendranath S. & Chakradhar D (2020), “Characterization and Evaluation of Joint Properties of FSWed AA6061/SiC/FA Hybrid AMCs Using Different Tool Pin Profiles”, The Indian Institute of Metals 73(9):2269-2279 DOI: https://doi.org/10.1007/s12666-020-02035-2

Sachinkumar Patil & Dasharath. S. M & Lakshmi Narayana. K. S (2018), “Application of taguchi technique to optimize the cutting parameters for turning of aa6351 with and without heat treatment”, International Journal of Mechanical and Production Engineering Research and Development8(6):921-927

D. Bakavos, P.B. Prangnell, B. Bes, F. Eberl (2008), “The effect of silver on microstructural evolution in two 2xxx series Al-alloys with a high Cu:Mg ratio during ageing to a T8 temper”, Materials Science and EngineeringA 491: 214–223 DOI: https://doi.org/10.1016/j.msea.2008.03.014

Yuming Xie, Xiangchen Meng, Feifan Wang, Yimeng Jiang, Xiaotian Ma, Long Wan, Yongxian Huang (2021), “Insight on corrosion behaviour of friction stir welded AA2219/AA2195 joints in astronautical engineering”, Corrosion Science192:109800 DOI: https://doi.org/10.1016/j.corsci.2021.109800

Sachin Kumar, Chakradhar D & Narendranath S. (2018), “Process parameter optimization for FSW of AA6061/ SiC/fly ash AMCs using Taguchi technique”, Emerging materials research 7(3):1-35 DOI: https://doi.org/10.1680/jemmr.17.00047

Sachinkumar, S. Narendranath, D. Chakradhar (2020), “Effect of traverse speed on joint characteristics of FSWed HAMCs”, Material today proceedings, 45 :1-4 DOI: https://doi.org/10.1016/j.matpr.2020.09.025

P. Mastanaiah, Abhay Sharma, G. Madhusudhan Reddy (2018), “Role of hybrid tool pin profile on enhancing welding speed and mechanical properties of AA2219-T6 friction stir welds”, Journal of Materials Processing Tech, 257: 257-269 DOI: https://doi.org/10.1016/j.jmatprotec.2018.03.002

Sachinkumar, Narendranath, S., & Chakradhar, D. (2018). Effect of FSW on microstructure and hardness of AA6061/SiC/fly ash MMCs. Materials Today: Proceedings, 5(9) :17866-17872. DOI: https://doi.org/10.1016/j.matpr.2018.06.113

Sachinkumar, Narendranath, S., & Chakradhar, D. (2018, April). Study on microstructure and tensile properties of fly ash AMCs welded by FSW. In AIP Conference Proceedings (Vol. 1943, No. 1, p. 020118). AIP Publishing LLC DOI: https://doi.org/10.1063/1.5029694

Sachinkumar, Nagamadhu, M., Badiger, R. I., & Babu, K. A. (2021). Analysis of effect of friction stir welding parameters on joint hardness and tensile strength of AA3003/SiC composites. Materials Today: Proceedings, 45: 115-119

J.Q. Li, H.J. Liu (2013), “Effects of tool rotation speed on microstructures and mechanical properties of AA2219-T6 welded by the external non-rotational shoulder assisted friction stir welding”, Materials and Design, 43:299-306

P. Ashwatha and M. Anthony Xavior (2016), “Processing methods and property evaluation of Al2O3 and SiC reinforced metal matrix composites based on aluminium 2xxx alloys”, Journal of Materials Research Society.1-19 DOI: https://doi.org/10.1557/jmr.2016.131

Liu Hui-jie, ZHANG Hui-jie, HUANG Yong-xian, YU Lei (2010), “Mechanical properties of underwater friction stir welded 2219 aluminum alloy”, Transactions of nonferrous metals society of China20 :1387-1391 DOI: https://doi.org/10.1016/S1003-6326(09)60309-5

Noor Zaman Khan, Arshad Noor Siddiquee, Zahid A. Khan, Ashim K. Mukhopadhyay, (2016), “Mechanical and microstructural behaviour of friction stir welded similar and dissimilar sheets of AA2219 and AA7475 aluminium alloys”, Journal of alloys and compounds, 12:1-10

K. Kamal Babu, K. Panneerselvam, P. Sathiya, A. Noorul Haq, S. Sundarrajan, P. Mastanaiah, C.V. Srinivasa Murthy (2018), “Influences of metastable q 0 and stable q intermetallics formed during cryorolling and friction stir welding process on AA2219”, Journal of Alloys and Compounds732:624-629 DOI: https://doi.org/10.1016/j.jallcom.2017.10.212

K. Anderson-Wedge, G. Stubblefield, N. Zhu, B. Long, S.R. Daniewicz, P. Allison, J. Sowards, O. Rodriguez, R. Amaro, (2021), “Characterization of the evolution of 2219-T87 aluminum as a function of the friction stir welding process”, International Journal of Fatigue, 142 :105954 DOI: https://doi.org/10.1016/j.ijfatigue.2020.105954

P. Bala Srinivasana, K.S. Arora, W. Dietzel, S. Pandey, M.K. Schaper (2010), “Characterisation of microstructure, mechanical properties and corrosion behaviour of an AA2219 friction stir weldment”, Journal of Alloys and Compounds, 492:631-637 DOI: https://doi.org/10.1016/j.jallcom.2009.11.198

H.B. Chen, J.F. Wang, G.D. Zhen, S.B. Chen, T. Lin (2015), “Effects of initial oxide on microstructural and mechanical properties of friction stir welded AA2219 alloy”, Materials and design18:26-32 DOI: https://doi.org/10.1016/j.matdes.2015.06.179

Sachinkumar, S. Narendranath, D. Chakradhar (2020), “Studies on microstructure and mechanical characteristics of as-cast AA6061/SiC/fly ash hybrid AMCs produced by stir casting” Materials today proceedings, 20(2): A1-A5 DOI: https://doi.org/10.1016/j.matpr.2020.01.266

Sachinkumar, S. Narendranath, D. Chakradhar (2021), “Analysis of the Effect of Friction Stir Welding Parameters on Characteristics of AA6061 Composites using Response Surface Methodology”, Trans Indian Inst Met,74:1303–1319 DOI: https://doi.org/10.1007/s12666-021-02214-9

Sachinkumar, Nagamadhu, M., Badiger, R. I., & Babu, K. A. (2021). Analysis of effect of friction stir welding parameters on joint hardness and tensile strength of AA3003/SiC composites. Materials Today: Proceedings, 45:115-119. DOI: https://doi.org/10.1016/j.matpr.2020.10.106

K.S. Arora, S. Pandey, M. Schaper, and R. Kumar (2010), “Microstructure Evolution during Friction Stir Welding of Aluminum Alloy AA2219”, J. Mater. Sci. Technol., 2010, 26(8): 747-753 DOI: https://doi.org/10.1016/S1005-0302(10)60118-1

M. Koilraj, V. Sundareswaran, S. Vijayan, S.R. Koteswara Rao (2012), “Friction stir welding of dissimilar aluminum alloys AA2219 to AA5083 – Optimization of process parameters using Taguchi technique”, Materials and Design42:1-7 DOI: https://doi.org/10.1016/j.matdes.2012.02.016

Y. Tao, D.R. Ni, B.L. Xiao, Z.Y. Ma, W. Wu, R.X. Zhang, Y.S. Zeng (2017), “Origin of unusual fracture in stirred zone for friction stir welded 2198-T8 Al-Li alloy joints”, Materials Science & Engineering A, 693 :1-13 DOI: https://doi.org/10.1016/j.msea.2017.03.079

J.Q. Li, H.J. Liu (2013), “Effects of tool rotation speed on microstructures and mechanical properties of AA2219-T6 welded by the external non-rotational shoulder assisted friction stir welding”, Materials and design43:299-306. DOI: https://doi.org/10.1016/j.matdes.2012.07.011

Yanying Hu, Huijie Liu, Shuaishuai Du (2021), “Achievement of high-strength 2219 aluminum alloy joint in a broad process window by ultrasonic enhanced friction stir welding”, Materials Science & EngineeringA 804:140587 DOI: https://doi.org/10.1016/j.msea.2020.140587

S. Arunkumar, P. Sathiya, K. Devakumaran, and S. Ramesh Kumar (2018), “Microstructural and Mechanical Characterization of as Weld and Aged Conditions of AA2219 Aluminium Alloy by Gas Tungsten Arc Welding Process”, Russian Journal of Non-Ferrous Metals,5(1): 93–101. DOI: https://doi.org/10.3103/S1067821218010030