A Deep Study on Machine Learning Techniques for Tool Condition Monitoring in Turning of Titanium-based Superalloys.

Jump To References Section

Authors

  • Sanjeet Jakati
     ,IN
  • Vishwanath Koti
     School of Mechanical Engineering, Ramaiah Institute of Technology, VTU. ,IN
  • Pramodkumar S. Kataraki
     School of Mechanical Engineering, REVA University. ,IN
  • M. Mazlan
     Advanced Material Research Cluster, Faculty of Bioengineering and Technology, Universiti Malaysia Kelantan, Jeli, Kelantan. ,MY
  • M. F. Hamid
     School of Mechanical Engineering, Universiti Sains Malaysia, Engineering Campus, Seri Ampangan, 14300 Nibong Tebal, Penang. ,MY

DOI:

https://doi.org/10.18311/jmmf/2022/31235

Abstract

The current state-of-the-art review on tool condition monitoring for turning of titanium-based superalloys is presented in this paper. Titanium (Ti) superalloys are widely utilised in aerospace industry, automobile industry, petrochemical applications. Ti superalloys are also used in fabrication of biomedical components due to their outstanding combination of mechanical properties and strong corrosion resistance at extreme temperatures. But these superalloys are difficult-to-cut because to their low heat conductivity, low elastic modulus, high strength, and strong chemical resistance. Literature review highlights the drastic reduction in tool life of titanium superalloys at highspeed and feed rates throughout the machining process. The review paper focuses on (i) various reasons to deploy tool condition monitoring; and (ii) study of tool condition monitoring methods based on machine learning techniques to identify the ideal parameters for the prevention of catastrophic tool failure.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

2023-03-15

How to Cite

Jakati, S., Koti, V., S. Kataraki, P., Mazlan, M., & Hamid, M. F. (2023). A Deep Study on Machine Learning Techniques for Tool Condition Monitoring in Turning of Titanium-based Superalloys. Journal of Mines, Metals and Fuels, 70(10A), 261–266. https://doi.org/10.18311/jmmf/2022/31235

Issue

Volume 70, Issue 10A, October 2022

Section

Articles

License

Copyright (c) 2023 Journal of Mines, Metals and Fuels

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Crossref
Scopus
Google Scholar
Europe PMC

 

References

S. D. Castellanos, A. J. Cavaleiro, A. M. P. D. Jesus, R. Neto, and J. L. Alves, “Machinability of titanium aluminides: A review,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications,vol. 233, no. 3. SAGE Publications Ltd, pp. 426–451, Mar. 01, 2019. doi: 10.1177/1464420718809386. DOI: https://doi.org/10.1177/1464420718809386

S. R. Okeet al., “An overview of conventional and non-conventional techniques for machining of titanium alloys,” Manufacturing Review, vol. 7. EDP Sciences, 2020. doi: 10.1051/mfreview/2020029. DOI: https://doi.org/10.1051/mfreview/2020029

D. Ulutan and T. Ozel, “Machining induced surface integrity in titanium and nickel alloys: A review,” International Journal of Machine Tools and Manufacture,vol. 51, no. 3. pp. 250–280, Mar. 2011. doi: 10.1016/j.ijmachtools.2010.11.003. DOI: https://doi.org/10.1016/j.ijmachtools.2010.11.003

J. B. D. Joshi, Institute of Electrical and Electronics Engineers, and IEEE Computer Society, Proceedings, 2016 IEEE International Conference on Big Data/ : Dec 05-Dec 08, 2015, Washington D.C., USA.

D. Wu, C. Jennings, J. Terpenny, R. X. Gao, and S. Kumara, “A Comparative Study on Machine Learning Algorithms for Smart Manufacturing: Tool Wear Prediction Using Random Forests,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 139, no. 7, Jul. 2017, doi: 10.1115/1.4036350.

K. Zacharia and P. Krishnakumar, “ScienceDirect Chatter Prediction in High Speed Machining of Titanium Alloy (Ti-6Al-4V) using Machine Learning Techniques,” 2018. [Online]. Available: www.sciencedirect.comwww.materialstoday.com/ proceedings

J. B. D. Joshi, Institute of Electrical and Electronics Engineers, and IEEE Computer Society, Proceedings, 2016 IEEE International Conference on Big Data/ : Dec 05-Dec 08, 2015, Washington D.C., USA.

A. Liaw and M. Wiener, “Classification and Regression by RandomForest,” 2001. [Online]. Available: https://www.researchgate.net/publication/ 228451484

R. Corne, C. Nath, M. el Mansori, and T. Kurfess, “Enhancing Spindle Power Data Application with Neural Network for Real-time Tool Wear/Breakage Prediction During Inconel Drilling,” in Procedia Manufacturing, 2016, vol. 5, pp. 1–14. doi: 10.1016/ j.promfg.2016.08.004.

T. Wuest, D. Weimer, C. Irgens, and K. D. Thoben, “Machine learning in manufacturing: Advantages, challenges, and applications,” Production and Manufacturing Research, vol. 4, no. 1, pp. 23–45, Jun. 2016, doi: 10.1080/21693277.2016.1192517. DOI: https://doi.org/10.1080/21693277.2016.1192517

T. N. Projoth, D. P. M. Victor, and P. Nanthakumar, “Analysis and prediction of cutting force through lathe tool dynamometer in CNC turning process,” in Materials Today: Proceedings, 2020, vol. 46, pp. 4174– 4179. doi: 10.1016/j.matpr.2021.02.681. DOI: https://doi.org/10.1016/j.matpr.2021.02.681

W. Ji, S. Yin, and L. Wang, “A big data analytics based machining optimisation approach,” Journal of Intelligent Manufacturing, vol. 30, no. 3, pp. 1483– 1495, Mar. 2019, doi: 10.1007/s10845-018-1440-9. DOI: https://doi.org/10.1007/s10845-018-1440-9

B. Yan, L. Zhu, and Y. Dun, “Tool wear monitoring of TC4 titanium alloy milling process based on multi-channel signal and time-dependent properties by using deep learning,” Journal of Manufacturing Systems, vol. 61, pp. 495–508, Oct. 2021, doi: 10.1016/ j.jmsy.2021.09.017. DOI: https://doi.org/10.1016/j.jmsy.2021.09.017

A. Gouarir, G. Martínez-Arellano, G. Terrazas, P. Benardos, and S. Ratchev, “In-process tool wear prediction system based on machine learning techniques and force analysis,” in Procedia CIRP, 2018, vol.77, pp.501–504. doi:10.1016/j.procir. 2018.08.253. DOI: https://doi.org/10.1016/j.procir.2018.08.253

J. C. Chen and J. C. Chen, “An artificial-neural-networks-based in-process tool wear prediction system in milling operations,” International Journal of Advanced Manufacturing Technology, vol. 25, no. 5–6, pp. 427–434, Mar. 2005, doi: 10.1007/s00170-003-1848-y. DOI: https://doi.org/10.1007/s00170-003-1848-y

M. Cheng, L. Jiao, X. Shi, X. Wang, P. Yan, and Y. Li, “An intelligent prediction model of the tool wear based on machine learning in turning high strength steel,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 234, no. 13, pp. 1580–1597, Nov. 2020, doi: 10.1177/0954405420935787. DOI: https://doi.org/10.1177/0954405420935787

M. Nalbant, H. Gökkaya, I. Toktaº, and G. Sur, “The experimental investigation of the effects of uncoated, PVD- and CVD-coated cemented carbide inserts and cutting parameters on surface roughness in CNC turning and its prediction using artificial neural networks,” Robotics and Computer-Integrated Manufacturing,vol. 25, no. 1, pp. 211–223, Feb. 2009, doi: 10.1016/j.rcim.2007.11.004.

M. Nalbant, H. Gökkaya, I. Toktaº, and G. Sur, “The experimental investigation of the effects of uncoated, PVD- and CVD-coated cemented carbide inserts and cutting parameters on surface roughness in CNC turning and its prediction using artificial neural networks,” Robotics and Computer-Integrated Manufacturing, vol. 25, no. 1, pp. 211–223, Feb. 2009, doi: 10.1016/j.rcim.2007.11.004. DOI: https://doi.org/10.1016/j.rcim.2007.11.004

R. Corne, C. Nath, M. el Mansori, and T. Kurfess, “Enhancing Spindle Power Data Application with Neural Network for Real-time Tool Wear/Breakage Prediction During Inconel Drilling,” in Procedia Manufacturing, 2016, vol. 5, pp. 1–14. doi: 10.1016/ j.promfg.2016.08.004. DOI: https://doi.org/10.1016/j.promfg.2016.08.004

S. I. Ao, Len. Gelman, D. W. L. Hukins, Andrew. Hunter, Alexander. Korsunsky, and International Association of Engineers., World Congress on Engineering/ : WCE 2013/: 3-5 July, 2013, Imperial College London, London, U.K.

S. Karam, P. Centobelli, D. M. D’Addona, and R. Teti, “Online Prediction of Cutting Tool Life in Turning via Cognitive Decision Making,” in Procedia CIRP, 2016, vol. 41, pp. 927–932. doi: 10.1016/j.procir.2016.01.002. DOI: https://doi.org/10.1016/j.procir.2016.01.002

D. Wu, C. Jennings, J. Terpenny, R. X. Gao, and S. Kumara, “A Comparative Study on Machine Learning Algorithms for Smart Manufacturing: Tool Wear Prediction Using Random Forests,” Journal of Manufacturing Science and Engineering, Transactions of the ASME, vol. 139, no. 7, Jul. 2017, doi: 10.1115/1.4036350. DOI: https://doi.org/10.1115/1.4036350