Volume 42, Issue 3, July 2009

Published: 2009-07-01

Articles

An Overview on Modular Employable Skills (MES) under Skill Development Initiative Scheme (SDIS)

M. Kumaravel

22-26
- PDF ⁰
Abstract views: 0 times| Download: 0 times|
Introduction of Low Cadmium Brazing Alloys

Sumant Mathure

27-30
- PDF ⁰
Abstract views: 0 times| Download: 0 times|
Analysis of Fatigue Design Recommendations for Aluminum Weldments with Imperfections

Y. U. Pardhi, P. K. Ghosh, D. Kosteas

31-42

Keywords:
Design Recommendations, Fusion Welded Joints, S-N Curves, Aluminum Alloys, Weld Toe Angle, Linear Misalignment, Lack of Penetration, Lack of Fusion, Imperfection Limits.
- PDF ⁰
Abstract views: 0 times| Download: 0 times|
Research Trends for Simulation Modeling, Parametric Optimization of Bead Geometry and Mechanical-Metallurgical Characteristics of Submerged Arc Weld: Review and Future Scope

Saurav Datta, Asish Bandyopadhyay

43-57

Keywords:
SAW, Modeling, Simulation, Optimization.
- PDF ⁰
Abstract views: 0 times| Download: 0 times|
Indepth Investigations into the Capability of Plazma Arc Cutting of Mild Steel Tubes

S. Chattopadhyaya, Ashish Soni, Anunay Priyesh, Sidhanth Raj, S. Mukherjee, S. Bhatia, A. Ghosh

58-64

Keywords:
Top Edge Rounding, Kerf Width, Dross, Top Spatter, Cut Surface Bevel Angle.
- PDF ⁰
Abstract views: 0 times| Download: 0 times|

Editorial

Catch Them Young & Train Them

P. K. Das

1-1
- PDF ⁰
Abstract views: 0 times| Download: 0 times|

Secretary's Report

From Hony. Secretary General's Desk

Parimal Biswas

3-3
- PDF ⁰
Abstract views: 0 times| Download: 0 times|

President's Message

Message

C. C. Girotra

2-2
- PDF ⁰
Abstract views: 0 times| Download: 0 times|